Frequently Asked Questions

  • They are primary made with marble plaster, ground mica, metal leaf, and inks finished with wax or resin. Hand applied on a non woven cellulose contact grade backing or woven glass backing.

  • Yes, they are naturally antimicrobial and moisture resistant due to the alkaline ph level of our plaster. Our only exception is our DECCA pattern, which could show water spotting.

  • Yes, all ASSEMBLAGE wallpapers receive a fire rating of ASTM E84 CLASS A or 1.

  • Currently all of our wallpapers are made to order. We do not keep stock.

  • 10-14 weeks. If you need something more quickly ask, we will make it happen if at all possible.

  • 36 patterns, 136 SKUs.

  • Price range $86–$359 per linear yard.

  • Minimum order 1 roll / 9 yards, for all standard products.

  • 9 yards.

  • No. Our wallcovering MUST be trimmed onsite. Otherwise you will experience poor seam adhesion and incorrect patterning on the wall.

  • Yes, email us at studio@assembledarts.com for a recommendation.

  • TENET
    Non-woven commercial grade duplex paper.
    Width 29” usable / 30” untrimmed,
    Wall should be prepared to level 5 finish before installing.

    VITREOUS
    Woven glass backing.
    Width 38” usable / 39” untrimmed.
    Can be installed on a less than perfect wall.

  • Products will be shipped rolled but should not be stored rolled for an extended period of time.
    Orders should be delivered within 2 weeks of installation date. We are happy to store your paper flat until you need it, just ask!

  • Yes, Larger format sampling available for project specific requests. Email us at studio@assembledarts.com.

  • Yes, almost always a discontinued item can still be ordered however, it will be treated as a custom.

  • Yes, minimum order for a custom color is 27 yards (3 rolls).
    Custom Strike off takes 2-3 weeks.
    Currently no custom strike off fee is charged.
    To initiate custom project the custom request form must be filled out.
    www.assembledarts.com/custom-request

  • Yes, minimum order for a custom pattern is 27 yards (3 rolls).
    Custom Strike off takes 2-3 weeks.
    Currently no custom strike off fee is charged.
    To initiate custom project the custom request form must be filled out 
    www.assembledarts.com/custom-request

  • To initiate custom project the custom request form must be filled out 
    www.assembledarts.com/custom-request

  • Most of our standard line products can be Value Engineered.
    Value engineering generally reduces the cost per yard by half.
    Value engineered pricing is project specific and is heavily tied to the quantity of yards ordered.
    Custom Strike off takes 2-3 weeks.
    Currently no custom strike off fee is charged.
    All VE products are made in the Assemblage Studio in Arkansas.

  • Most of our patterns can be created in Type II Vinyl Versions.
    Minimum order starting at 1000 yards, development takes approximately 6 months.
    Custom sample fee varies based on design.
    Pricing is project specific and is heavily tied to the quantity of yards ordered.
    Reach out to start the conversation at studio@assembledarts.com.